Standard Hydraulic Gear Pump With Vavle 3-30cm3/Rev Displacement

Pump with Vavle

A gear pump with a valve refers to a gear pump that incorporates a valve within its design or is used in conjunction with a valve in a hydraulic system. The valve is used to control the flow, pressure, or direction of the hydraulic fluid being pumped by the gear pump.

There are several ways a valve can be integrated with a gear pump:

1. Relief Valve: A relief valve is commonly used in conjunction with a gear pump to control the maximum pressure within the hydraulic system. It is typically set to a specific pressure threshold, and when that pressure is reached, the relief valve opens to divert excess fluid back to the reservoir, preventing overpressure situations.

2. Directional Control Valve: A directional control valve is used to control the direction of fluid flow within a hydraulic system. It can be connected to a gear pump to determine the direction in which the hydraulic fluid is pumped. By actuating the directional control valve, the operator can control the flow path and thus the movement of hydraulic actuators or motors.

3. Flow Control Valve: A flow control valve is used to regulate the flow rate of hydraulic fluid in a system. It can be installed in-line with the outlet of a gear pump to control the rate at which the fluid is allowed to pass through. This allows for precise control of the speed or force of hydraulic actuators.

These are just a few examples of how a valve can be incorporated with a gear pump. The specific type and configuration of the valve will depend on the requirements of the hydraulic system and the desired control parameters.

It's important to consider the compatibility and proper sizing of the valve with the gear pump to ensure efficient and reliable operation. Manufacturers or hydraulic system designers can provide guidance on selecting the appropriate valve for a gear pump based on specific application requirements.

Standard Hydraulic Gear Pump With Vavle 3-30cm3/Rev Displacement Images